telefon-logo
kontakt-logo

OG accessories

Overspeed governors

Tension weights and accessories for overspeed governors

Tension weight LG 100/200/300 frame

Tensioning weight for GB 160 / HJ 200 / HJ 300 with mounting frame for
mounting on the guide rail

Additional weight LG 200/300

Protective enclosure LG 200/300

Tension weight LG 100/200/300 console

Clamping weight for GB 160 / HJ 200 / HJ 300 with mounting bracket for
direct wall mounting

Tension weight SG 100/200/300

Tension weight for GB 160 / HJ 200 / HJ 300 with with guide frame for
attachment to the ground

AS Attachment Set A3 for GB 160

Attachment set for the overspeed governor (AS), consisting of mounting bracket with mounted solenoid 12 VDC (1.95A) or 24 VDC (0.98A) 100% ED and monitoring switch (SIS switch 20KAS, 1 NC, 1 NO, momentary contact) with roller attachment and mounting set for direct attachment to the overspeed governor bearing plate.

AS Attachment kit A3 for HJ 200/300

Attachment kit for overspeed governor (AS), consisting of mounting bracket with mounted solenoid 12 VDC (1.41A) or 24 VDC (0.66A) or 230 VAC (0.09A) 100% ED and monitoring switch (SIS switch 20KAS, 1 NC, 1 NO, momentary contact) with roller attachment and mounting kit for direct attachment to the overspeed governor end shield

Remote release for HJ 200/300

Remote release (electromagnet) with direct connection via rectifier plug, 230 VAC or

with direct connection to 205 VDC or 24 VDC or 12 VDC. Duty cycle 5% ED

Combi attachment set for HJ 200/300

Attachment set for emergency limit switching, consisting of mounting bracket with control current limit switch (Si. switch 12345), switching linkage, release springs, rope jump protection SAS Kombi and attachment set for direct attachment to the base plate of the overspeed governor.

Safety switch

Safety switch with slow action (momentary) or snap action (latching) with up to 3 contacts. In version as pre-cut-off switch with electromagnetic reset of the pressure pin.

Protective enclosure 200/300

Rope pulley S 2-WB