MODEL SERIES SG
Discover our SG safety gear: It is characterized by its small and compact design. With a minimum distance of only 19.5 mm (with 4 mm clearance) between the guide rail head and the safety gear frame, it allows optimum use of space in the elevator car, even in narrow shafts. We will be happy to advise you on any questions regarding the installation and release of the safety gear.
Good to know:
Our SG series rounds off our range of safety gears in terms of size and possible catch loads at the bottom. This particularly small safety gear for the elevator is mainly used in new installations. Especially the SG1D-1, which only covers the catch downwards, is a very good and demanded product, which is often used for new catch frames. The catch upwards is covered by a brake on the elevator drive.
Brake safety gear SG1D-1
CATCH IN DOWNWARD DIRECTION
Max. Nominal speed: 2.50 – 2.80 m / s
Max. Release speed: 3.23 m / s
Minimum tread width: 19mm
Rail head thickness: 5-16mm
Safety gear (downward)
Safety gear (downward)
Total mass [kg], min. – Max.
Machined rails,
– dry: 543 kg – 3,095 kg
– oiled: 523 kg – 2,935 kg
Drawn rails,
– dry: 305 kg – 2,605 kg
– oiled: 299 kg – 2,542 kg
The brake safety device SG1D-1 is very compact, as standard it is available with two different release rods.
—
Brake safety gear SG2D-1
Catch in downward direction
Protective device against overspeed (upwards) and unintentional car movements
Max. nominal speed: 2.50 – 2.80 m/s
Max. release speed: 3.23 m/s
Minimum track width: 19mm
Rail head thickness: 5-16mm
Safety gear (downward)
Total mass: 292kg (min) – 2.889kg (max)
(depending on rail type)
Overspeed (upwards)
Braking force: 4.001 N (min) – 45.353 N (max)
(depending on rail type)
Unintentional car movements (UCM / A3)
Max. Release speed: 2.20 m/s
Braking force: 4,001 N (min) – 45,353 N (max)
(depending on rail type)
—
SG2D-1, version 1
The braking force for catching downwards and upwards can be set continuously and independently with variant 1.
Impact Shield SG2D-1, Version 1
Find more information here: SG2D-1 Variant 1
SG2D-1, Variant 2
Variant 2 of the SG2D-1 is more compact. The ratio for the braking forces below / above is fixed.
Impact shield SG2D-1, variant 2
There is more information here: SG2D-1 Variante 2
Advantages of the SG safety gear series
Small, compact design
– 140mm x 146mm x 49.5mm for the SG1D-1
– 200mm x 164mm x 56.5mm for the SG2D-1
High catch load combined with high speeds
Minimum space required between guide rail head and frame attachment: 19.5 mm (4 mm air)
Uniform deceleration due to long spring travel of the disk springs
Flexible use in systems with internal and external guide rails (MRL, backpack)
Low forces for releasing the car from the catch
A wide range of options for triggering the safety gear enables optimum synchronization, matched to different car designs
Prevention of unintentional release by separate securing of the catch roller
Safety gear is type-tested without release, this allows flexible installation
Buy brake safety gear SG in complete package at SLC
We have made it our mission to make things as easy as possible for you at all times. To this end, we have optimized the entire ordering process – from constructive support in selecting the optimum product to transparent order processing.
Furthermore, it is possible to purchase products of the safety gear series SG in advantageous complete packages. With SLC, the scope of delivery you require can include not only the safety gear but also the overspeed governor with tensioning weight and governor rope, guide shoes, lubricator and an electronic safety control (UCM-MOD kit) for detecting unintentional car movements. This saves you the expense of multiple orders from additional suppliers. In some cases, we even surpass our partners’ offers here, because we can usually deliver ex stock (overspeed governors) or in quantity 1 (guide shoes). And if you are in a hurry, we also offer an express service. Please contact us for more information!
Your advantages at a glance:
Simple ordering process and transparent order processing
Fast delivery of products from stock, even from quantity 1
Complete, comprehensive material packages available (no more ordering from different suppliers)
Many accessories available
Express service possible
We are happy to answer any questions you may have and look forward to hearing from you.