Guide shoes, lubricators and ropes
In addition to our safety gears and overspeed governors, our wide range of components for elevator construction also includes a number of guides for different loads and applications.
Holding shoes made of high quality aluminum alloys
The holding shoes made of high-quality aluminum alloys have a high load capacity and wear resistance, due to the well thought-out and stable design. We offer holding shoes & inserts suitable for all common rail widths. Our holding shoe inserts convince with very good damping (PU), good sliding properties (PA), very good sliding and damping properties (DT), with additional self-lubrication (DT-GF) or with high hardness and thus extreme abrasion resistance (PE and PEC).
We supply the following packaging units from stock. Further inserts can be supplied at short notice on request.
Two angled guide shoes each made of aluminum with inserts (extreme abrasion resistance and damping) and fastening material.
(Application range: max. 2,000 kg payload at nominal speed 2.5 m/s)
SLC parts number:
506.000.615
Description
VE Guide shoe PEC with cushioning
WSM 140 / 8 mm
506.000.616
VE Guide shoe PEC with cushioning
WSM 140 / 9 mm
506.000.617
VE Guide shoe PEC with cushioning
WSM 140 / 10 mm
506.000.618
VE Guide shoe PEC with cushioning
WSM 140 / 12 mm
506.000.619
VE Guide shoe PEC with cushioning
WSM 140 / 14 mm
506.000.620
VE Guide shoe PEC with cushioning
WSM 140 / 16 mm
In each case two holding shoes made of aluminum with inserts (extreme
abrasion resistance and damping) and fastening material
(Application range: max. 2,000 kg payload at nominal speed 2.5 m/s)
SLC parts number:
506.000.612
Descriptions
VE Guide shoe PEC with cushioning
HSM 140 / 8 mm
506.000.607
VE Guide shoe PEC with cushioning
HSM 140 / 9 mm
506.000.608
VE Guide shoe PEC with cushioning
HSM 140 / 10 mm
506.000.614
VE Guide shoe PEC with cushioning
HSM 140 / 12 mm
506.000.609
VE Guide shoe PEC with cushioning
HSM 140 / 14 mm
506.000.605
VE Guide shoe PEC with cushioning
HSM 140 / 16 mm
Two angled guide shoes each made of aluminum with inserts (extreme abrasion resistance and damping) and fastening material.
(Application range: max. 4,000 kg payload at nominal speed 2.5 m/s)
SLC part numbers:
506.000.647
Description
VE Guide shoe PEC with cushioning
WSML 180 / 14 mm
506.000.621
VE Guide shoe PEC with cushioning
WSML 180 / 16 mm
506.000.622
VE Guide shoe PEC with cushioning
WSML 180 / 19 mm
Two angled aluminum guide shoes each with inserts
(high abrasion resistance) and fastening material
(Application range: max. 10,000 kg payload at nominal speed 1.6 m/s)
SLC parts number:
506.000.623
Description
VE Guide shoe PEC with cushioning
WSMEL 300 / 16 mm
506.000.624
VE Guide shoe PEC with cushioning
WSMEL 390 / 19 mm
506.000.628
VE Guide shoe PEC with cushioning
WSMEL 300 / 28,6 mm
Two cast guide shoes each (without inserts)
and fixing material (Haushahn factory standard)
SLC parts number:
506.000.504
Description
VE Guide shoe Payload max.: 2,500 kg / 1.0 m/s
FS 150 / 9 mm
506.000.505
VE Guide shoe Payload max.: 2,500 kg / 1.0 m/s
FS 150 / 16 mm
506.000.506
VE Guide shoe Payload max.: 4,000 kg / 1.0 m/s
FS 190 / 16 mm
506.000.507
VE Guide shoe Payload max.: 6,300 kg / 1.0 m/s
FS 250 / 16 mm
506.000.509
VE Guide shoe Payload max.: 10,000 kg / 1.0 m/s
FS 300 / 16 mm
Zubehör für Schienen und Führungsschuhe
506.000.629
HSM 140 guide angle with accessories (2 pieces)
Mounting bracket for attaching HSM 140 holding shoes (M16 x 40)
506.000.720
PU Underlay plate HSM 140 / 1.5 (4 pieces)
4 shims with material thickness 1.5mm, hole pattern 84 x 88 mm
506.000.721
PU Chuck plate HSM 140 / 1,0 (4 pieces)
4 lining plates with material thickness 1.0 mm, spacing: 84 mm, depth: 160 mm
506.000.722
PU Rail oiler HSM / WSM 140 / 180 (2 pieces)
For HSM / WSM 140 and 180, 2 pieces each for rail head thickness 8 – 16 mm
506.000.723
PU Oil collector 5-16 mm (2 pieces)
For HSM / WSM 140 and 180, 2 pieces each for rail head thickness 8 – 16 mm
