
bf tripping device
The safety gear of the BF series can be connected to the speed limiter rope in different ways:
– with our tripping device, side mounting
– With the tripping device, side mounting and a pull / pressure pipe
– only with a draw tube for catching downwards
Detailed information you can like our assembly instructions
(Document NO .: 300.000.210 or 300.000.214 for triple safety gear), which we would be happy to send you on request.
BF tripping device, ,,side mountin”
Our standard release for a distance between the speed limiter cable and the center of the guide rail of minimum 240mm and maximum 390mm
Trigger linkage
Side mounting
_________________________
Distance from center of guide rail and
first speed governor rope:
min. 240 mm and max. 390 mm
106.700.400 Release linkage BF on the side with rope connection (5 – 6.5 mm)
106.700.390 Release linkage BF on the side with rope connection (6 – 8.0 mm)
106.700.392 Release linkage BF on the side, without rope connection S
BF tripping device “side mounting” in combination with pull / push tube
If the distance between the speed limiter cable and the center of the guide rail is less than 240mm or greater than 390mm,
We recommend a combination with a pull / push pipe.
Release linkage, side-mounted in combination with pull / push tube
106.700.392 Release linkage side mounting without rope connection
106.930.259 draw tube L = 3.000mm
or
106.930.260 draw tube L = 1,000mm
106.850.442 PU accessories pull tube 6.5mm
106.850.441 PU belonging to pull tube 8.0mm
BF tripping ,, draw tube ”
If only the catch is used downwards (BF1D-1 or BF1D-2),
Alternatively, the speed limiter cable can also be connected directly to the turntables of the safety gear using a draw tube
Triggering with draw tube
106.930.259 draw tube L = 3.000mm
or
106.930.260 draw tube L = 1,000mm
106.50.442 PU accessories pull tube 6.5mm
106.50.441 PU accessories pull tube 8.0mm