VERTICAL SLIDING DOORS
Biparting Doors
REGULAR BIPARTING DOORS
Regular biparting doors are used in hoistways hoistways that have ample floor to floor height, pit depth and overhead height.
Minimal floor to floor height: 1,5 x opening height + 150 mm
Minimal pit depth: 0,5 x opening height + 102 mm
Return space: 330 mm both sides
Car clearance: 127 mm
Regular door
Pass- and extended biparting doors
PASS-TYPE BIPARTING DOOR
Pass-Type Biparting doors are used in hoistways that have short floor to floor heights.
When the floor to floor height is less than 1.5 of the opening height + 150mm
Minimal floor to floor height: opening height + 150 mm
Minimal pit depth: 0,5 x opening height + 102 mm
Return space: 330 mm both sides
Car clearance: 171 mm
EXTENDED SILL BIPARTING DOOR
Extended Sill Biparting doors are used in conjunction with Pass-Type doors. Extended sill doors have a regular door upper panel and a pass-type door lower panel.
Minimal floor to floor height: 1,5 x opening height + 150 mm
Minimal pit depth: 0,5 x opening height + 102 mm
Return space: 330 mm both sides
Car clearance: 171 mm
COMPOUND 2:1 BIPARTING DOOR
Compound 2:1 Biparting doors consist of a lower door panel that is 1/2 the height of the upper panel. These doors are used when the hoistway pit is very shallow. Compound 2:1 biparting doors are available in regular or pass-type configurations.
Minimal floor to floor height: 1,66 x opening height + 150 mm
Minimal pit depth: 0,33 x opening height + 102 mm
Return space: 330 mm both sides
Car clearance: 127 mm
Maximal car lap: 50mm, before notching platform
COMPOUND 2:1 PASS-TYPE BIPARTING DOOR
Minimal floor to floor height: 1,67 x opening height + 406 mm
Minimal pit depth: 0,33 x opening height + 102 mm
Return space: 330 mm both sides
Car clearance: 170 mm
Maximal car lap: 50mm, before notching platform
Verbindung 2:1 Standard-Ausführung
Verbindung 2:1 Durchgangs-Ausführung
Telco upper half door
TELCO UPPER HALF BIPARTING DOOR
Telco Upper Half Biparting doors consist of an upper panel made from two separate panels which telescope upwards. These doors are used when hoistway overhead height is severely limited.
Minimal floor to floor height: 1,25 x opening height + 330 mm
Minimal pit depth: 0,5 x opening height + 102 mm
Return space: 330 mm both sides
Car clearance: 171 mm
SLIDE UP DOORS
SINGLE SECTION SLIDE-UP DOOR
Single Section Slide-Up Doors are made of a single, counter-weighted door panel that slides-up to open. This type of door is used when there is insufficient pit depth to suit a Biparting door option and sufficient vertical floor to floor height to accommodate this door assembly.
Minimal floor to floor height: 2 x opening height + 143 mm
Return space: 457 mm both sides
Car clearance: 171 mm
Single section slide-up door
Zweiteilige Schiebetür
TWO SECTION SLIDE-UP DOOR
Two Section Slide-Up Doors are made of a two, counter-weighted door panels that slides-up to open. This type of door is used when there is insufficient pit depth to suit a Biparting door option and reduced vertical floor to floor height that would not permit the use of a Single Section Slide-Up Door.
Minimal floor to floor height: 1,5 x opening height + 279 mm
Return space: 460 mm both sides
Car clearance: 191 mm
THREE SECTION SLIDE-UP DOOR
Three Section Slide-Up Doors are made of a three, counter-weighted door panels that slides-up to open. This type of door is used when there is insufficient pit depth to suit a Biparting door option and reduced vertical floor to floor height that would not permit the use of a Two Section Slide-Up Door.
Minimal floor to floor height: 1,33 x opening height + 279 mm
Return space: 460 mm both sides
Car clearance: 241 mm
Three section slide-up door
